ABIO - Main Section

Κίτρινο ξύλο 36200 - 50γρ

Με την χρήση alum έχουμε κίτρινο και με κασσίτερο υπάρχουν πιό λαμπερά χρώματα. Το οξείδιο του μολύβδου δίνει πορτοκαλοκίτρινες αποχρώσεις και το χαλκό πράσινες. Ο σίδηρος δίνει σκούρα πράσινα της ελιάς και μαύρες αποχρώσεις (βλέπετε το pdf για περιγραφή και συνταγές).

Recipe: Textile Color, with Yellow Wood

Corn Yellow

Preparation: The fabric should be washed as hot as possible. I.e. wool and silk with wool detergent at approx. 30°C and cotton and linen at up to 90°C.

Put the washed, damp fiber into the mordant bath and leave it for 12 hours or even longer. Move gently from time to time. Rinse well and place still damp in the prepared dye bath.

Processing

Step 1: Soak 100 g of Yellow Wood (#36200) covered with cold water overnight. Fill up with 4-5 l of water. Let simmer at about 70°C for one hour. Let the bath cool down and strain.

Step 2: Put the Yellow Wood into a dye bag and put it back into the pot. Add the textile fiber to the cooled dye bath and slowly re-heat to 70°C.

Step 3: Leave the bath to cool down again, gently agitating from time to time. Depending on the intended color shade, the fabric can rest in the bath even longer but should still be moved from time to time.

Step 4: Either dry unwashed and rinse afterwards or rinse and wash immediately. The oxidation process while drying helps to fix the dye.

NOTE

Dyeing Results: The type of mordant as well as treatment duration have a decisive influence on the dyeing result. Our recipes always aim at the full color shade. Corresponding lighter shades can be achieved by reducing the plant dye and/or diluting the dye bath with water. It is also possible to increase the amount of fabric, but this implies adjusting the quantity of dye bath so that all fibers are covered.

Cleaning: Cleaning pots works best with hot water and citric acid (#64150).

fustic, cut pieces